Georgia · Roofing · Free 2026 permit-fee estimator
Roofing permit cost in Georgia
On a typical $12,000 roofing project, Georgia's statewide median building permit fee is $72 — about 0.60% of cost. Top Atlanta metros run higher.
Your project cost
Leave blank to use the typical roofing value, or enter your quote to refresh all metro fees below.
Georgia statewide median
$72
≈ 0.60% of $12,000 project cost
Range: $65 (min) – $1,200 (max)
Top 3 Georgia metros — actual permit fee
The state base × project type stays the same; the metro multiplier is where the swing comes from.
Atlanta
$94
Metro multiplier: 1.3× statewide base
Savannah
$76
Metro multiplier: 1.05× statewide base
Augusta
$68
Metro multiplier: 0.95× statewide base
Georgia permit-fee context
Atlanta + suburbs run 1.2%; rural counties flat-fee $50-$200 for residential.
Why roofing? Single re-roof permit, low fee in most states. Florida/HVHZ markets add hurricane-rated inspection fees.
What this fee does NOT include
- Plan-review service fees (typically 0.5–1% of cost, separate line)
- Per-trade fees (plumbing, electrical, mechanical — $50–$200 each)
- State-level surcharges (FL DBPR, NJ DCA, OR BCD, etc.)
- Contractor's filing/processing fee
Rule of thumb: budget 1.5–2× the base permit fee for the all-in cost.
Compare roof replacement in Georgia across all lenses
4 sister tools · same project, same stateBefore you sign, run the 4 other state-aware lenses for the same project.
FAQ — Roofing permits in Georgia
How much is a roofing permit in Georgia in 2026?
On a typical $12,000 roofing project in Georgia, the statewide median permit fee runs $72 — about 0.60% of project cost. Major metros run higher: Atlanta $94, Savannah $76, Augusta $68. Atlanta + suburbs run 1.2%; rural counties flat-fee $50-$200 for residential.
Why is the fee higher in major Georgia metros?
Each Georgia city/county sets its own multiplier on top of the state base rate. Atlanta runs 1.3× because of stricter plan review + structural review + energy-code overhead. Augusta sits lower (0.95×) because of less plan-review depth + simpler intake. Rural counties in Georgia often have flat-fee schedules below even the lowest metro.
What's included in the permit fee vs. what's billed separately?
The permit fee covers the building department's intake + base review. NOT included: plan-review service fees (often a separate line, 0.5–1% of project cost), per-trade fees for plumbing/electrical/mechanical (typically $50–$200 each), and any state-level surcharges (FL adds DBPR 1.5%, NJ adds DCA, OR adds 12% BCD surcharge). Your contractor's filing fee is also separate. Budget 1.5–2× the base permit fee for the all-in cost.
Can I skip the permit and save the fee?
Don't. Working without a required permit fails any future resale inspection (the buyer's inspector WILL flag it), voids your homeowner's insurance for any related claim, and triggers retro-permitting fines that are typically 2–3× the original fee. Georgia treats unpermitted roofing work as a separate violation under state building code. The "savings" become a $1,500 problem at resale on a $500 fee.
Other projects in Georgia
Disclaimer: Permit fees are jurisdiction-specific and change frequently. These values are 2026 medians — verify against your local building department's current fee schedule before budgeting.