Alabama · Roofing · Free 2026 permit-fee estimator
Roofing permit cost in Alabama
On a typical $12,000 roofing project, Alabama's statewide median building permit fee is $79 — about 0.66% of cost. Top Birmingham metros run higher.
Your project cost
Leave blank to use the typical roofing value, or enter your quote to refresh all metro fees below.
Alabama statewide median
$79
≈ 0.66% of $12,000 project cost
Range: $75 (min) – $1,200 (max)
Top 3 Alabama metros — actual permit fee
The state base × project type stays the same; the metro multiplier is where the swing comes from.
Birmingham
$95
Metro multiplier: 1.2× statewide base
Huntsville
$87
Metro multiplier: 1.1× statewide base
Mobile
$75
Metro multiplier: 0.95× statewide base
Alabama permit-fee context
Municipal-issued; statewide minimum building code, no state fee schedule. Plan-review fees stack on top in major metros.
Why roofing? Single re-roof permit, low fee in most states. Florida/HVHZ markets add hurricane-rated inspection fees.
What this fee does NOT include
- Plan-review service fees (typically 0.5–1% of cost, separate line)
- Per-trade fees (plumbing, electrical, mechanical — $50–$200 each)
- State-level surcharges (FL DBPR, NJ DCA, OR BCD, etc.)
- Contractor's filing/processing fee
Rule of thumb: budget 1.5–2× the base permit fee for the all-in cost.
Compare roof replacement in Alabama across all lenses
4 sister tools · same project, same stateBefore you sign, run the 4 other state-aware lenses for the same project.
FAQ — Roofing permits in Alabama
How much is a roofing permit in Alabama in 2026?
On a typical $12,000 roofing project in Alabama, the statewide median permit fee runs $79 — about 0.66% of project cost. Major metros run higher: Birmingham $95, Huntsville $87, Mobile $75. Municipal-issued; statewide minimum building code, no state fee schedule. Plan-review fees stack on top in major metros.
Why is the fee higher in major Alabama metros?
Each Alabama city/county sets its own multiplier on top of the state base rate. Birmingham runs 1.2× because of stricter plan review + structural review + energy-code overhead. Mobile sits lower (0.95×) because of less plan-review depth + simpler intake. Rural counties in Alabama often have flat-fee schedules below even the lowest metro.
What's included in the permit fee vs. what's billed separately?
The permit fee covers the building department's intake + base review. NOT included: plan-review service fees (often a separate line, 0.5–1% of project cost), per-trade fees for plumbing/electrical/mechanical (typically $50–$200 each), and any state-level surcharges (FL adds DBPR 1.5%, NJ adds DCA, OR adds 12% BCD surcharge). Your contractor's filing fee is also separate. Budget 1.5–2× the base permit fee for the all-in cost.
Can I skip the permit and save the fee?
Don't. Working without a required permit fails any future resale inspection (the buyer's inspector WILL flag it), voids your homeowner's insurance for any related claim, and triggers retro-permitting fines that are typically 2–3× the original fee. Alabama treats unpermitted roofing work as a separate violation under state building code. The "savings" become a $1,500 problem at resale on a $500 fee.
Other projects in Alabama
Disclaimer: Permit fees are jurisdiction-specific and change frequently. These values are 2026 medians — verify against your local building department's current fee schedule before budgeting.